09100022600 2 position + Earth Male with snap-in latch Screw Type for 0.75 to 1.5mm wire

Code: 09 10 002 2600

Harting Han 1A 2 position + Earth Male with snap-in latch Screw Type for 0.75 to 1.5mm wire






Price on Application
Identification
Category Inserts
Series Han® 1A

Version
Termination method Screw termination
Gender Male
Size 1 A
Number of contacts 2
PE contact Yes
Locking type Snap-in latches
Details Order separately the single wire seal or the hoods/housings for an IP65 performance. Identification
Category
Inserts
Series
Han® 1A
Version
Termination method
Screw termination
Gender
Male
Size
1 A
Number of contacts
2
PE contact
Yes
Locking type
Snap-in latches
Details
Order separately the single wire seal or the hoods/housings for an IP65 performance.
 A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user. 
Details
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.

Technical characteristics
Conductor cross-section 0.75 ... 1.5 mm²
Rated current 10 A
Rated voltage conductor-earth 230 V
Rated voltage conductor-conductor 400 V
Rated impulse voltage 4 kV
Pollution degree 3
Insulation resistance >108 Ω
Tightening torque 0.25 Nm
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20

Material properties
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material (contacts) Copper alloy
Surface (contacts) Silver plated
Material flammability class acc. to UL 94 V-0
RoHS compliant with exemption
ELV status compliant with exemption
China RoHS 50
REACH Annex XVII substances No
REACH ANNEX XIV substances No
REACH SVHC substances Yes
California Proposition 65 substances Yes

Specifications and approvals
Specifications
EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B
EN 60664-1
Approvals
DNV GL