Code: 09 10 003 2705
3 position + Earth Female for locking lever Screw Type for 0.75 to 1.5mm wire
Price on Application
3 position + Earth Female for locking lever Screw Type for 0.75 to 1.5mm wire
Identification
Category Inserts
Series Han® 1A
Version
Termination method Screw termination
Gender Female
Size 1 A
Number of contacts 3
PE contact Yes
Locking type Single locking lever
Details Please order locking lever separately.
Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details A Han®
1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.
Technical characteristics
Conductor cross-section 0.75 ... 1.5 mm²
Rated current 10 A
Rated voltage conductor-earth 230 V
Rated voltage conductor-conductor 400 V
Rated impulse voltage 4 kV Pollution degree 3
Insulation resistance >108 Ω
Tightening torque 0.25 Nm
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20
Category Inserts
Series Han® 1A
Version
Termination method Screw termination
Gender Female
Size 1 A
Number of contacts 3
PE contact Yes
Locking type Single locking lever
Details Please order locking lever separately.
Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details A Han®
1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.
Technical characteristics
Conductor cross-section 0.75 ... 1.5 mm²
Rated current 10 A
Rated voltage conductor-earth 230 V
Rated voltage conductor-conductor 400 V
Rated impulse voltage 4 kV Pollution degree 3
Insulation resistance >108 Ω
Tightening torque 0.25 Nm
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20
Material properties
Material (insert) Polyamide (PA)
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material (contacts) Copper alloy
Surface (contacts) Silver plated
Material (seal) NBR
Colour (seal) Black
Material flammability class acc. to UL 94 -0
RoHS compliant with exemption
RoHS exemptions 6(c):
Copper alloy containing up to 4 % lead by weight
ELV status compliant with exemption
China RoHS 50
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Yes
REACH SVHC substances Lead
ECHA SCIP number 5dbb3851-b94e-4e88-97a1-571845975242
California Proposition 65 substances Yes
California Proposition 65 substances Lead
Fire protection on railway vehicles EN 45545-2 (2020-08)
Requirement set with Hazard Levels R22 (HL 1-3) R23 (HL 1-3)
Specifications and approvals
Specifications EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals DNV GL
Material (contacts) Copper alloy
Surface (contacts) Silver plated
Material (seal) NBR
Colour (seal) Black
Material flammability class acc. to UL 94 -0
RoHS compliant with exemption
RoHS exemptions 6(c):
Copper alloy containing up to 4 % lead by weight
ELV status compliant with exemption
China RoHS 50
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Yes
REACH SVHC substances Lead
ECHA SCIP number 5dbb3851-b94e-4e88-97a1-571845975242
California Proposition 65 substances Yes
California Proposition 65 substances Lead
Fire protection on railway vehicles EN 45545-2 (2020-08)
Requirement set with Hazard Levels R22 (HL 1-3) R23 (HL 1-3)
Specifications and approvals
Specifications EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals DNV GL
