Harting 091000033205 3 position + Earth Male for locking lever Crimp type for 0.14 to 4mm wire

Code: 09 10 003 3205

3 position + Earth Male for locking lever Crimp type for 0.14 to 4mm wire






Price on Application
3 position + Earth Male for locking lever Crimp type for 0.14 to 4mm wire

Identification
Category Inserts
Series Han®  1A

Version
Termination method Crimp termination
Gender Male
Size 1 A
Number of contacts 3
PE contact Yes
Locking type Single locking lever
Details Please order crimp contacts separately.
Please order locking lever separately. Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details A Han®  1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated conditions

Technical characteristics
Conductor cross-section
0.14 ... 4 mm²
Rated current ‌ 16 A
Rated voltage 400 V
Rated impulse voltage 6 kV
Pollution degree  3
Insulation resistance >108  Ω
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20

Material properties
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material flammability class acc. to UL 94 V-0
RoHS compliant
ELV status compliant
China RoHS e
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Not contained
California Proposition 65 substances Not contained
Fire protection on railway vehicles EN 45545-2 (2020-08)
Requirement set with Hazard Levels R22 (HL 1-3) R23 (HL 1-3)

Specifications and approvals
Specifications
EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals DNV GL