Code: 09 10 004 3005
Cat.5A 4 position Male for Locking Lever Crimp type for 0.13 to 0.82mm wire
Price on Application
Cat.5A 4 position Male for Locking Lever Crimp type for 0.13 to 0.82mm wire
Identification
Category Inserts
Series Han® 1A
Version
Termination method Grimp termination
Gender Male
Size 1 A
Shielding With cable tie
Number of contacts 4
further contacts + shielding
Locking type Single locking lever
Details Please order crimp contacts separately.
Please order locking lever separately.
Order separately the hoods/housings for an IP65 performance.
Contact insert not compatible with 09 10 000 0800 (bulkhead mounted housing, angled)
Details A Han®
1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Technical characteristics
Conductor cross-section 0.13 ... 0.82 mm²
Rated current 4 A
Rated voltage 48 V AC 60 V DC
Rated impulse voltage 1.5 kV
Pollution degree 3
Transmission characteristics Cat. 5 Class D up to 100 MH
Data rate 10 Mbit/s 100 Mbit/s
Insulation resistance >108 Ω
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20
Material properties
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material flammability class acc. to UL 94 V-0
RoHS compliant
ELV status Compliant
China RoHS e
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Not contained
Specifications and approvals
Specifications EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals DNV GL
Category Inserts
Series Han® 1A
Version
Termination method Grimp termination
Gender Male
Size 1 A
Shielding With cable tie
Number of contacts 4
further contacts + shielding
Locking type Single locking lever
Details Please order crimp contacts separately.
Please order locking lever separately.
Order separately the hoods/housings for an IP65 performance.
Contact insert not compatible with 09 10 000 0800 (bulkhead mounted housing, angled)
Details A Han®
1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Technical characteristics
Conductor cross-section 0.13 ... 0.82 mm²
Rated current 4 A
Rated voltage 48 V AC 60 V DC
Rated impulse voltage 1.5 kV
Pollution degree 3
Transmission characteristics Cat. 5 Class D up to 100 MH
Data rate 10 Mbit/s 100 Mbit/s
Insulation resistance >108 Ω
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 100
Degree of protection acc. to IEC 60529 IP20
Material properties
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material flammability class acc. to UL 94 V-0
RoHS compliant
ELV status Compliant
China RoHS e
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Not contained
Specifications and approvals
Specifications EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals DNV GL
